Product Description
Brian Tooley BTR Twin Turbo Stage 1 Camshaft V2
Fits 1997-2013 LS Based Engines 4.8L 5.3L 5.7L 6.0L 6.2L
Specs: 218/23x .618"/.618" 113LSA, 3 Bolt Pattern
This new V2 version of the BTR Twin Turbo Stage 1 camshaft was developed for use in 5.3/Hi-ram/Twin turbo street and strip combinations, although it's a versatile camshaft that performs well in a wide range of applications. Good for 5.3s and 6.0s with cathedral port heads, it also will work well in LS3 headed applications. Developed in house, BTR went back to the drawing board in search of more power and torque, even with the use of less intake duration. These new BTR lobe designs were Spintron tested to help achieve the highest overall power curve while also maintaining strict valvetrain stability and durability standards. At the end of the day, if you're using a pair of smaller 58mm - 66mm turbos on your LS-based build ,and plan on putting some street miles on it, the Twin Turbo Stage 1 grind is hard to beat.
Our kit options take the guesswork out and include:
Camshaft only: BTR Twin Turbo Stage 1 camshaft by itself
Steel Retainer Spring Kit with Pushrods: BTR Twin Turbo Stage 1 cam plus BTR Platinum .660" Dual Spring kit with Steel Retainers, Valve Seals, and 7.400" length 5/16" Chromoly Pushrods
Titanium Retainer Spring Kit with Pushrods: Includes the above, but with an upgrade from Steel to Titanium Retainers
Gasket kit: Includes Timing cover gasket, water pump gaskets, front crankshaft seal and new damper bolt
Note:
- DOD/AFM equipped engines will require a conversion to conventional lifters
- VVT engines will require a VVT delete kit
- If installing in an engine originally equipped with a 1-bolt camshaft, a 3 bolt conversion kit will be required.
