Product Description
Texas Speed 6.125" Forged Super I-Beam Rods for LS Engines
Fits 1997-2013 LS-Based Engines when used with matching aftermarket pistons
Set of 8 Connecting Rods
Texas Speed's forged Super I-Beam Rods are made using heat treated and stress relieved 4340 Steel and undergo a very detailed machining process to ensure maximum strength and reliability. Each TSP Rod is torqued and re-torqued during the machining process. During manufacture, the rods are initially torqued and rough honed. The bolts are then removed, and the rod & cap are then separated allowing the release of residual stress. The rods are then reassembled and re-torqued for final honing. This process assures that the rod bore will maintain exceptional roundness when installed in an engine. These Super I-Beam rods are a great upgrade over the H-beam rods when looking to make 1000-1200hp. We have been 7.50's in the 1/4 with these rods in a stock-block 6.0L combination at 3,000lbs.
- All TSP Rods include ARP L19 Rod bolts for Maximum Clamping force.
- 6.125" Center to Center Length
- .927" Bronze-bushed Wrist Pin End for use with aftermarket pistons
- Will Not work with factory pistons or wrist pins
- Blocks utilizing piston oil squirters may require some clearancing on the connecting rods.
