Product Description
Black Fuel Injector Spacer Adapter - Shorty Truck 4.8 5.3 6.0 Injector to LS1 LS6 Intake
Spacers add approximately .68" to overall length of the Injector
Quantity of 8
This is a fuel injector extender kit. This kit will allow you to adapt the following:
- LS3/LS7/LS9/L76 short injectors in an LS2 manifold with the stock LS2 fuel rail.
- Delphi Truck (non-flex fuel) 4.8L 5.3L 6.0L injectors in a LS1/LS6 manifold with the stock LS1 fuel rail.
- If you raise the fuel rail (with .3" spacer/washer) then It will also allow you to run a Delphi 4.8 5.3 6.0 Truck injector in an LS2 manifold with the stock fuel rail.
The spacers get mounted on the top of the injector. If you were to put them on the bottom, the spray pattern of the injector would get messed up and the car would not run right.
-
Fits most top feed fuel injectors
-
Adds 11/16 (.68) inch to the height of the injector
-
(outlet) Internal diameter is 0.55 inch and (inlet) external diameter is 0.53 inch. O-ring diameter is 0.58 inch
-
Comes with o-rings
